top of page

Metallic Heat Transfer Material


Metallic Heat Transfer Material has a satiny, foil-like finish with a soft feel. Easy to cut, weed, and apply, it offers a one-step application. It holds fine detail well, even on stretch fabrics. Once handled or laundered, the foil shine takes on a pleasing brushed metallic finish.

• material composition: polyurethane

• 50cm (20") wide

• rated 50+ washes

• priced per metre

  • Instructions for Use:

    Preparation & Cutting:

    1. Place Metallic on cutting mat carrier-side down.
    2. Cut desired design(s) in reverse (mirror imaged).
    3. Weed excess material away, leaving only desired graphic on carrier.


    1. Preheat garment 10 seconds to remove moisture/wrinkles.
    2. Position weeded design on garment right-side up. Cover with press cloth/press sheet and heat apply as follows:
      • Temperature: 285°F (140°C)
      • Time: 8-10 seconds
      • Pressure: medium
      • Peel: cold
  • Additional Info:

    Care Instructions:

    • Machine wash cold, inside-out, using mild detergent on delicate setting. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.


    • Store in a cool and dry area. Keep away from direct heat, sunlight and humidity.
  • Pro Tips:

bottom of page