top of page
colour chart of available Premium Plus heat transfer material

Premium Plus™ Heat Transfer Material


With superior stretch and rebound, Premium Plus low-temp HTM is a great choice for application on every-day casual wear to performance wear. Available in a great range of colours, it applies with a silky matte finish, sheer enough that it doesn't change the hand of the garment, yet with an impressive wear-longevity!
• material composition: polyurethane

• 50cm (20"w)

• rated 50+ washes

• priced per metre

• out-of-stock colours available for pre-order

  • Instructions for Use:

    Preparation & Cutting:

    1. Place Premium Plus on cutting mat carrier-side down.
    2. Cut desired design(s) in reverse (mirror imaged). For optimal cutting and weeding, maintain a minimum line thickness of ⅛”.
    3. Weed excess material away, leaving only desired graphic on carrier.


    1. Preheat garment 10 seconds to remove moisture/wrinkles.
    2. Position weeded design on garment right-side up. Cover with press cloth/press sheet and heat apply as follows:
      • Temperature: 280°F-330°F (138°C-166°C)
      • Time: 8-12 seconds
      • Pressure: medium
      • Peel: warm or cold
  • Additional Info:

    Care Instructions:

    • Machine wash using mild detergent; no bleach. Dry at a normal dryer setting on household machines. Do not iron directly onto this material.


    • Shelf life is indefinite when stored at temperatures below 75°F (24°C), away from direct heat, sunlight and humidity.
bottom of page